AI Mini Printer Sticker Print Portable Thermal Inkless Maker Bluetooth Pocket Instant Printing for School Office Home for Study Note,Journal,DIY,Gift

Motherboard Main Controller: AI
Battery Type: 18650 Lithium-ion Battery
Battery MOS:  Dual MOS
Battery Capacity: 3.7V/1200mAh
Print Head Specifications: 2-inch Black-and-White Thermal Printer Core
Print Resolution: 203 dpi (Dot Density: 8 dots per millimeter)
Effective Print Width: 48 mm
Print Paper Width: 57 mm
Wi-Fi Antenna Frequency: 2.4G Wi-Fi
Speaker Specifications: Diameter 36 mm, 8Ω 2W
Charging Cable Specifications: 1A, with one USB Type-A connector and one Type-C charging connector

TYPE-C Interface Charging: 5V/1A
Data Transfer: Not Supported

Charging Indicator Light: Red LED: Lights up red during charging, turns off when fully charged

Status Indicator Light: Green LED: Lights up green when powered on. Flashes green when Bluetooth is not connected. Remains steadily lit when Bluetooth is successfully connected. Device automatically powers off after 10 minutes of idle use.

Power-On Current Startup: 20-30 mA

Shutdown Current Shutdown Startup: 20-30 mA

Operating Current Printing: 0.5-2 A

Peak Current Maximum Load: 2 A

Standby Current, Powered On but Not in Use: <20 mA

Leakage Current, Self-Discharge When Powered Off: <50 μA

Total Power Consumption,(Voltage × Current × 80%): <18 W

Charging Current, Charging while Powered On/Powered Off: 650-720 mA

Charging Duration while Powered Off: 2-2.5 hours

Discharge. Continuous Printing/Usage: Under fully charged condition, it supports continuous printing for approximately 1 hour, capable of printing over 2.5 rolls of paper.